VG 345

VOLT GUARD
FEATURES
  • Protection Arrester - High Voltage "Spikes"
DESCRIPTION

The Volt Guard - Model 345 is a budget or entry level Power Protection Spike Arrester designed to give a high level of protection from damaging high voltage spikes.

The Volt Guard using multiple MOV's (metal oxide varistors), absorbs and re-directs over voltage spikes to earth. This means that your valuable equipment is afforded vital protection.

The Volt Guard automatically detects and reacts against high voltage 'spikes' protecting your sensitive electronic equipment from these damaging and dangerous occurrences that commonly cause breakdown, poor performance and long term damage or destruction of sensitive electronic equipment.

The Volt Guard offers quality protection proven to reduce the incidence of power related damage to sensitive electronics.

The Volt Guard has been specifically designed as a dedicated single outlet protection device. (Refer Fig # 1)

RECOMMENDED APPLICATIONS

TV's, CD & Stereo Equipment, Microwave Ovens, Multi Outlet Power Boards, VCR's... In Fact - All Sensitive Equipment.

When used in conjunction with 9 multiple outlet power board it is imperative that the Volt Guard be plugged into the power board's first socket and then the equipment to be protected into the Volt Guard. (Refer Fig # 2)

This configuration will provide protection for all outlets on the power hoard while providing 9 barrier for your most sensitive equipment plugged into the Volt Guard, from AC mains events or feed back from neighbouring devices sharing the power board.

SINGLE OUTLET CONFIGURATION FIG #1

SPECIFICATION

POWER BOARD CONFIGURATION FIG #2

When used in this configuration the VoltGuard protects all equipment plugged into your existing power board while isolating the protected appliance from damaging spikes and cross talk.
Protection is provided over all 3 conductors
Protection Modes   Differential Mode (Active - Neutral)
    Common Mode (Active - Neutral Earth)
Reaction Time
:
1 to 3 nano seconds
Electrical Rating
:
220/240V 50Hz 10 Amps (2400w)
Maximum Clamping Voltage
:
275 Volts
Maximum Amps Absorption
:
11,500A
Max Joules Absorption
:
280 Joules
Operation Temperature
:
-10 to 70C
Energy Approval # Aust/NZ
:
W2140